 |
|
 |
|
| AT-701 AT-702 AT-703 AT-706 AT-706W AT-708 |
 |
 PDF Video |
|
| APPLICATION |
This unit is ideal for cutting various log roll materials such as PVC/OPP/PE/Masking tape/Double-side tape/Plastic films…etc. |
| FEATURES |
Cutting shaft and circular blade are driven by A.C motor with inverter control, which is able to set running direction obverse/reserve on different requests. |
| Width setting is controlled by servo motor with ball screw and guide rails to make accuracy movement. |
| All functions are operated under LCD touch panel control, which is operator friendly and easy for data setting. |
| Central control system is as PLC unit, it can cut various sizes on one log roll by changing modes automatically. |
|
|
| MAIN TECHNICAL PARAMETERS: |
| Valid Width |
1000mm/1300mm/1600mm |
| Max. diameter material |
270mm (300 mm) |
| Max. cutting speed |
35cuts/min |
| Inside diameter of paper core |
32-76.2mm |
| Main motor |
5 HP |
| Blade drive motor(Servo motor) |
3 HP x 6 P |
| Blade diameter |
150-350 mm |
| Blade speed |
360-1800 rpm |
| Optional Parts: |
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Cutting Supporter: For supporting log roll when cutting core below 38mm.
3. Air type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
4. Safety Cover: To protect operator during the production, which is compliant to the CE regulation.
5. Special Introduction: This model has design of obverse/reverse type frame, 1 operator can use both machines for bulk production if set up 2 machines face to face.
6. Sharpening Device: Grinding knife on the machine to save time for taking blade off. |
|
|
|
|
 |
|
 |
|
